What to do when the industrial water chiller is cut off?

- Jul 22, 2019-

All kinds of faults can be encountered in long - term industrial chillers. As for industrial chiller, if water break is very dangerous, it must be timely and effectively handled. If the optimal processing time is delayed, it will lead to serious failure of industrial chiller or even failure of normal operation of the equipment. The causes of water failure of industrial chiller are different, so when dealing with the fault, the first step is to analyze the specific causes of water failure.

In daily use of industrial chiller, the heat dissipation of industrial chiller depends on the water source to take away the hot air. If there is no water source flowing at high speed, a large amount of heat cannot be volatilized in time, resulting in a very fast temperature rise. When the temperature reaches the critical point of high temperature, the industrial cold water machine protects itself by shutting down. Therefore, as long as the water failure occurs, the industrial chiller will usually stop running about 15 minutes after the operation, so as to protect the core components of the industrial chiller.

How to deal with the water failure?

1. Distinguish the specific reason of water cut

The causes of water failure of industrial chiller are different, so when dealing with the fault, the first step is to analyze the specific causes of water failure. If there is a problem with the water supply, it is only necessary to restore the water supply in time to resume the operation of industrial chillers. If the fault belongs to the pump, it is necessary to carry out comprehensive maintenance and maintenance of the equipment at this time, timely eliminate the pump fault, and carry out comprehensive test at the same time. Make sure the water pump is working normally before the industrial chiller can be started normally.

2. Stop maintenance immediately until the water flow returns to normal

Industrial chillers must be shut down for maintenance. Running industrial cold water machines also shut down after about ten minutes because they generate more heat. Therefore, the maintenance inspection under the shutdown state can avoid the extra high temperature, which can mainly ensure that the industrial chiller is in the normal operating temperature range, so as to guarantee the normal operating state of the industrial chiller.

There is no need to panic when encountering various industrial chiller faults. Through careful analysis of industrial chiller with professional equipment, the root cause of failure can be found out. Then according to their own specific ability, to develop a suitable maintenance plan, in the shortest time, to ensure the re-operation of industrial chiller.


image