Three aspects of the efficiency of centrifugal fans

- Apr 18, 2019-

How to improve the working efficiency of the centrifugal fan? This is an important issue for centrifugal fans, and it is also of concern to everyone. Therefore, since it has been put forward, and it has certain importance, then, let's discuss and explain the work immediately, so as to give some specific guidance, so that everyone can get a lot of gains.

The improvement of the working efficiency of the centrifugal fan can be carried out in detail from the following aspects. The specifics are as follows:

Aspect 1: Start of the centrifugal fan

If the centrifugal fan fails to start at startup, or if the startup time is too long, there may be some problems in the fan, for example, the motor cannot be dragged normally, or the rated power of the motor is too low. At this time, it is necessary to replace the appropriate motor.

In addition, there may be friction or obstructions on the rotor that cause it to become stuck. Therefore, it is necessary to check the rotor to find out the specific reason to solve it effectively, so that the fan can be started normally and the fault can be reduced.

Aspect 2: Impeller of centrifugal fan

Sometimes, the impeller of a centrifugal fan is found to consume energy, but there is no benefit to the entire fan. Therefore, at this time, the front cover of the fan, the current collector, and the casing and the rotating shaft should be inspected to solve the problem and ensure the reliability of the operation of the centrifugal fan.

Aspect 3: Vibration problems of centrifugal fans

Centrifugal fans, which are prone to vibration problems during use, are to be avoided. If they occur, they must be effectively solved, such as appropriate reduction of fan speed, and other measures. However, depending on the actual situation, it depends on the actual situation.