1. The speed of the blower is high, the gap between the rotor and the rotor, and between the rotor and the body is small, so there is less leakage, and the volume efficiency is high. With strong processing and assembly technology, it can ensure reasonable and even clearance, achieve high volume efficiency and avoid friction due to thermal expansion in the body.
2. Since the impeller operates in the body without friction and without lubrication, the discharged gas does not contain oil. It is an ideal air source for chemical industry and food industry in Shanghai.
3. The structure of DC blower determines that its mechanical friction loss is very small. Because only bearing and gear pair have mechanical contact on material selection, rotor, casing and gear ring have enough mechanical strength. Safe operation and long service life is a major feature of blower products.
4. The rotor of DC blower has been checked by static and dynamic balance. The finished product runs smoothly with little vibration.
5. The ink of the blower is very small, because only the bearing and gear pair have mechanical contact on the material selection, and the rotor, casing and gear ring have sufficient mechanical strength. Safe operation and long service life.
6. The structure causes that the impeller has no friction in the body, so that the discharged gas does not contain oil. It is an ideal pneumatic conveying gas source for chemical, food and other industries.
7. When in use, the flow changes little with the change of pressure. But the flow changes with the speed. Therefore, the selection range of pressure service is very wide, and the selection of flow can be achieved by selecting the speed.https://www.ck-stone.com/